Упрощенная HTML-версия
67
Ø130
53
82
2
Dimensions
• Round recessed luminaire for outdoor installation on wall and
ground.
• Configuration: die-cast aluminium structure. EN AB-47100 (low
copper content)
• Double layer coating for high resistance to corrosion: chemical
conversion coating on the aluminium surface followed by a first layer
of epoxy powder and a second finishing layer of polyester powder.
• Sandblasted glass with silkscreen border, AISI 316L stainless steel
frame.
• Glass fixed to the aluminium body through a robotic gluing system
• Protection Rating: IP67
• In compliance with EN 60598-1
• Class of insulation: mains: I, low-voltage: III
• Installation: the luminaire is equipped with a plastic cable gland
and a piece of cable for an easy-to-make connection. Outdoor use
requires suitable flexible cables assuring the watertightness of the
cable gland. Installation requires a dedicated box to be ordered
separately. It is important to provide a >200mm gravel layer or a
drain system (for concrete surface) to ensure good drainage and to
avoid water stagnation.
• Warning! Use IP68 connectors to avoid water ingress from the cable.
Chiara
0. Inox
Do not install in
hollow areas.
Installation requires a
30cm water drainage
layer (gravel)
Recessed wall fitting
kg
Check that diffuser’s
temperature “T max °C”
(tested at 25°C)
complies with your local
regulation
Static load: 500Kg
walk over
Protection against
impact.
IK 08 - 5,00 joule
Pre-wired with approx
250mm of cable.
Remote device required.
for 24V version
111