Стр. 188 - ARES

67
100 L
L1
78,5
L= 645
L1= 620
L= 1245
L1= 1220
L= 1545
L1= 1520
Dimensions ü Recessed linear luminaire for outdoor/indoor installation in ground
or ceiling.
ü Configuration: extruded aluminium body ( EN 6060) with double
layer coating for high resistance to corrosion: chemical conversion
coating on the aluminium surface followed by a first layer of
epoxy powder and a second finishing layer of polyester powder.
Die-cast double closing end on each side allowing easy and safe
maintenance, moulded silicone gasket,8mm thick tempered
transparent or sandblasted glass with silkscreen border mechanically
fixed to the body by a silicone adhesive.Electrical components are
installed on a removable frame.
ü Protection Rating: IP67
ü In compliance with EN 60598-1 standards
ü Class of insulation: fluorescent lamp: II; LED module: I
ü Installation: wiring through two plastic M20 cable glands (ø<13mm
cables) placed on one of the two closing ends where a plastic box
allows connection to the removable electric module. Outdoor use
requires suitable flexible cables assuring he watertightness of the
cable gland. Installation requires a dedicated box to be ordered
separately. It is important to prived >200mm gravel layer or a drain
system (for concrete surfaces) to ensure good drainage and to avoid
water stagnation.
ü Warning! Use IP68 connectors to avoid water ingress from the cable.
Cielo
L. 645 mm: Cielo 14W, Cielo (12 LED) and Cielo RGB (18 LED)
L. 1245 mm: Cielo 28W, Cielo (24 LED) and Cielo RGB (36 LED)
L. 1545 mm: Cielo (35W)
Do not install in
hollow areas.
kg
Static load: 1500Kg
walk over
Installation requires a
20cm water drainage
layer (gravel)
The fitting is
equipped with
2 cable input.
Protection against
impact.
IK 09 - 10,00 joule
Ceiling recessed
installation (for L 645
and L 1245 version only)
2. Aluminium
Check that diffuser’s
temperature “T max °C”
(tested at 25°C)
complies with your local
regulation
187
2013