Стр. 413 - OSRAM_lamp_2014

9.73
HALOTRONIC ®
HALOTRONIC® electronic transformers and
dimmers for optimum operation of low-voltage
halogen lamps
HALOTRONIC® is primarily intended for:
– Recessed ceiling luminaires with strain relief
– Display spots
– Domestic luminaires (integrated and surface-mounted
furniture luminaires)
Versions
HTi DALI 105 DIM / HTi DALI 150 DIM can be integrated
in DALI lighting systems and are also dimmable via
push-button with Touch DIM®. Daylight/motion-depen-
dent operation is possible with the DALIeco or DALI
Professional system. Both transformers are suitable for
emergency power installations.
More detailed information about DALI see page 10.43 ff.
and suitable components in chapter 10.
HALOTRONIC® LONG (HTL) is available in 105 W and
225 W versions for convenient separate mounting:
– 2 terminal pairs on the primary side for looping from
unit to unit
– 3 large terminal pairs on the secondary side for
connecting up to 3 luminaires in parallel
Featuring long lifespans with simultaneously high ther-
mal load capacity, suitable for use in emergency power
installations.
HALOTRONIC® MOUSE® HTM is available in three watt-
ages as a compact standard unit with strain relief for low
suspended ceilings.
The electronic transformer from OSRAM – successfully
used in millions of applications.
HALOTRONIC® NANO (HTN) in conjunction with
miniaturized low-voltage halogen lamps is ideal for par-
ticularly tight spaces. Excellent thermal behavior despite
the extremely small size.
ET-PARROT® is a cost-effective alternative to conventional
transformers in the 70 -150 W range.
HTi DALI 315 DIM as a trailing-edge phase dimmer
enables all listed electronic transformers to be
integrated into a DALI system and can alternatively
be operated by push-button. Daylight/motion-
dependent operation is possible with the DALIeco
or DALI Professional system. Also suitable for
high-voltage lamps.
Application
– Accent lighting
– Decorative lighting
– Foyers/reception areas
– Hallways/corridors
– Stores and exhibition spaces
– Single offices and conference rooms
– Domestic areas
Comfort
– A weight of around 80% less and 40% less space
than standard transformers gives much greater
scope for planning halogen-based lighting systems
– All devices have secure strain relief and fixing
options
– Dimmable
– Electronically reversible cutout protects against
short-circuit, overload and overtemperature
Economy
– Protective lamp operation throughout the entire
partial-load range for long lamp life
– No additional fusing measures required for ready-
to-connect device
– Approx. 60% lower power loss compared to
standard transformers
– Energy efficiency ≥ 91% in compliance with ErP
directive 2012/1194/EC
Safety
– All transformers are VDE/IMQ tested
– Suitable for mounting on wooden surfaces
– All transformers have gg
– Suitable without additional measures for luminaires
with protection classes II and III and for luminaires
with R and RR designation or with g and gg
designation
– Complies with international, European and German
standards for safety and EMC
Guarantee
OSRAM provides customers with unique guarantees
(for guarantee details see page 9.05)*:
– 5-year guarantee for OSRAM HALOTRONIC®
electronic transformers in connection with low-
voltage halogen ECO lamps from OSRAM
– 5-year guarantee for OSRAM HALOTRONIC®
DIMMER in connection with HALOTRONIC®
transformers
– 3-year guarantee for HALOTRONIC®
electronic transformers
Prescribed dimmer for HALOTRONIC ®
HTL 105/230-240 L,C
HTL 225/230-240 L,C
HTM 70/230-240 L,C
HTM 105/230-240 L,C
HTM 150/230-240 L,C
HTN 75/230-240 I C
ET-PARROT ® 70/220-240 I C
ET-PARROT ® 105/220-240 I C
ET-PARROT ® 150/220-240 I C
C with trailing-edge phase dimmer
L,C with trailing-edge phase dimmer or leading-edge phase dimmer for inductive loads
Dimmers for ohmic loads are not suitable.
*For conditions and details see www.osram.com/system-guarantee