Упрощенная HTML-версия
432
Isotera - Contactless LED Driver System
Easy installation
Simple 6 step installation process.
You can also view our comprehensive installation video scanning the QR code or visiting:
www.havells-sylvania.com/en_GB/downloads/videos
Connect the orange iBus cable to the power hub and press the reset button.
The LED indicator on the power hub should turn green.
Easy Installation 1
Connect the couplers to the cable. Push the slider backwards and securely
insert the cable in the front part the coupler.
Push the slider forward and insert the cable securely into the back part of
the coupler. Note: Light will turn on between step 2 and 3.
Return the slider to its original position. It should now cover both parts of
the cable fully and securely.
Repeat steps 2 to 4 for each luminaire that you are coupling to the cable.
Enjoy your completed lighting installation.
Easy Installation 2
Master command – run from the power hub
Simply link the light switch, connected to a Switch-Interface Module, via its
RJ11 cable to the power hub. Turn on and off with the switch.
Master command – Connect to all couplers in a group
Simply link the light switch via its RJ11 cable to a coupler. Then extend a
linking RJ11 to the next coupler using a 2-way adapter. Repeat as many times
as needed. Turn on and off by pressing the switch briefly. Dim up and down
by holding down the switch.
Master command – Run from a single coupler
Simply link the light switch, fitted with a Switch-Interface Module,
via its RJ11 cable to a coupler. Turn on and off by pressing the switch briefly.
Dim up and down by holding down the switch.