Упрощенная HTML-версия
Technical
461
Electrical protection
EN 60.598
Class 1 – fittings comply with class 1 (l) earthed electrical requirements i.e.
functional insulation in all parts and earth termination.
Class 2 – fittings comply with class 2 (ll) double insulated electrical requirements
i.e. complete insulation in all parts without earth termination. In the event of an
electrical fault, no dangerous voltage can reach touchable metal parts.
Class 3 – fittings comply with class 3 (lll) triple insulated electrical requirements
i.e. designed to connect to an external low voltage supply which is the same as
the internal operating voltage requirement. In the event of an electrical fault, no
dangerous voltage can develop. Inflammability of surface protection EN 60.598
Suitable for mounting in or on furniture made or semi-incombustible or normally
combustible materials such as wood.
Fittings made for mounting in or on furniture made of materials of unknown
properties.
Passes the 650˚ glow wire test in accordance with IEC 695-2-1.
Horizontal rotation
Vertical tilt
Safety isolating transformer
Electronic transformer
Electronic ballast/gear
HID lamp requires an external ignitor
Ceiling cut-out – round
Ceiling cut-out – square
Trailing edge dimmable (capacitive)
Leading edge dimmable (inductive)
Ingress protection
Impact protection
Minimum distance in metres permitted from lighted object
European Norms Electrical Certification
Suitable for Office applications
Suitable for Healthcare applications
Suitable for Education applications
Suitable for Retail and Display applications
Suitable for Exterior applications
Allowed lamp operating positions
Universal burning position
Horizontal burning position
Vertical burning position
Incandescent Candle and Ball:
Base up not allowed
Lamp can be operated in luminaires without a protective shield
Lamp should be operated only in a luminaire provided with a protective shield
Lamp emits a high level of UV radiation
Reduced UV emissions
Cool beam reflector
Not dimmable
Protection against water contact
Internal ignitor
External ignitor
Ballast is required
Lamp should not be operated when the outer bulb is broken
Be aware of high temperatures when replacing lamp
Do not hold the lamp glass when installing or removing
Switch off power supply before replacing lamp
Do not touch lamp with bare fingers when replacing lamp
Energy saving
Treat lamp as small chemical waste
Open packaging and read instructions
Read instructions before use
Lamp complies with legal standards
Lamp complies with legal standards
Grüne Punkt
Bowl Mirror lamps
Luminaire can be looped
RoHS compliant
WEE compliant
Warranty logo, please refer to intro pages for full details
Ball resistant luminaire
RAL reference
Guide To Symbols
360
$
DO NOT TOUCH
LAMP WITH
BARE FINGERS
> 300 °C
E
WARRANTY
WEEE