Упрощенная HTML-версия
Technical
473
Specifications
The following notes prepared to meet the company’s obligations imposed by the Health
& Safety at Work Act 1974 (Amended 1988) are of a general nature only. Specific
information regarding installation use and disposal appropriate to individual models
is provided in the instruction leaflet packed with the product, or can be found on the
relevant pages of this catalogue.
The Health & Safety at Work Act 1974 imposes upon the users of the company’s
products an obligation to ensure that all personnel involved in the installation, handling,
use or disposal of these products are acquainted with the information provided by the
Company and are made fully aware of any precautions that need to be taken.
The installation of these products should only be carried out by a qualified contractor in
accordance with the instructions supplied with the product.
Specifications
Leadership in design is based on constant development and improvement. Whilst great
care is taken to give up-to-date information in this publication, the right is reserved
to change any specifications herein detailed, without prior notice. All descriptions,
illustrations etc, in this publication shall not form part of any contract.
Track and Spotlights
All track and spotlights are designed for normal, dry interiors, and are not
recommended for use in damp or corrosive situations. Adequate ventilation will be
necessary when tungsten spotlights are used in confined spaces where elevated
temperatures will occur.
Lamps
Wattage and where applicable type of lamp are shown for every fitting. Incorrect lamps
may affect efficiency, change the planned distribution, create glare and in some cases,
seriously overheat the luminaire. Unless otherwise stated all luminaires are supplied
without lamps.
Wiring
The majority of luminaires are fully prewired and with heat resistant cable wherever
required.
Weights
Where given, the weights of luminaires do not include lamps.
Transformer & Control Gear
Transformers and Control Gear are available for 240V 50HZ and 230V 50HZ with other
options subject to special quotation.
240V 50HZ will be supplied unless any other voltage is requested at the time of
ordering.
Ceiling Cut-outs
Throughout this publication cut-out sizes refer to the aperture for the ceiling ring with
recessed fittings when mounted in soft fibrous tiles. For timber or metal tiles and cast-in
construction, check dimensions on site.
Product colours and finishes
The Havells-Sylvania range of standard colours has been rationalised. This change
situation has provided
Havells-Sylvania with the opportunity to harmonise our standard colours in line with
developments that have taken place in architectural materials and building accessories.
For reference the standard paint finishes are now:
Concord luminaire
RAL 9005 Jet Black Black
RAL 9006 White Aluminium Silver
RAL 9010 Pure White White
RAL 9016 Traffic White White
Sylvania Outdoor luminaires
RAL 9007 Light grey Grey
LED Lamps
RAL 9023 Dark Silver
RAL 9016 Traffic White
Please note:
s $UE TO PHOTOGRAPHY AND THE PRINTING PROCESS THE COLOURS REPRODUCED IN THIS CATALOGUE
may not be truly representative.
s 4HOUGH PAINT COLOURS MAY BE THE SAME GLOSS MATT SATIN AND TEXTURED lNISHES WILL
appear different.
Protection of Electronic Components
All products incorporating electronic components are protected against damage which
may result from transients on the mains supply.
4HE LEVEL OF PROTECTION INCORPORATED IS GENERALLY IN EXCESS OF THE MINIMUM LEVEL SPECIlED
in the current international standards.
It is the customer’s responsibility to ensure that electronic equipment is not subjected
TO TRANSIENTS ABOVE THESE INTERNATIONAL IMMUNITY STANDARDS )N EXTREME CASES ADDITIONAL
suppression devices may be needed on the mains supply. The company does not take
RESPONSIBILITY FOR DAMAGE TO PRODUCTS CAUSED BY EXCESSIVE MAINS TRANSIENTS 0ATENTS
Many of the products listed in this publication are the subject of Patents or Patent
Applications and/or Design Registration UK and other countries.