Упрощенная HTML-версия
110
DMX 512
24V PWM
DMX 512
24V PWM
A
B
MINIRING-FLAT
DRIVE-OVER
The recessing box must be placed at
ground level. 30 cm drainage gravel
or drainage pipe must be used under
the recessing box to allow easy water
evacuation. Connection to the main line
has to be done into junction boxes.
Die-cast EN AB-44100 aluminium
housing (copper free) with high corrosion
resistance.
Marine grade stainless steel AISI 316L
3 mm thick or aluminium front trim.
Toughened glass diffuser 15mm thick for
MINIRING, 12 mm thick for MINIFLAT.
Stainless steel screws.
Luminaire hard wired with Factory-sealed
with B component epoxy resin H07RN-F
cable.
Fast connector IP68 included.
Recessing box in polypropylene.
Silicone gaskets.
Double powdered paint
in 3 step process:
_ surface treatment containing
ceramic nano particles (Bonderite);
_ epoxy primer paint;
_ polyester powder paint with high
resistance against UV rays and harsh
weather conditions.
Lamp included.
LED versions are supplied with LED
circuit board and transformer.
IP67
CLASS I
CLASS III
for RGB
IK 10
LED BLUE
available on request
FINISHING:
Drive-over 5000 Kg for
MINIRING and 3500 Kg for
MINIFLAT at max 30 Km/h
Stainless steel (code .19)
Black
(code .09)
160° PROTECTIVE HEAD + CONVEX LENS*
All MINIFLAT fittings can be equipped
with a combination of convex lens and
protective head
CONVEX LENS ACCESSORY*
All MINIFLAT fittings
can be equipped with convex lens.
Such lens modifies the width of
the light beam
* Drive-over 2000 Kg at max 10 Km/h
REMOTE BOX RGB DMX
36W (12W for 3 channels) 240V/24V PWM
DMX address included
controlled by DMX (type S.3493) protocol
Dimensions 260x260x100mm
IP55
REMOTE BOX RGB DMX
100W (33W for 3 channels) 240V/24V PWM
DMX address included
controlled by DMX (type S.3493) protocol
Dimensions 260x260x100mm
IP55
REMOTE CONTROL UNIT
It allows the wireless connection via
radio waves between the controller
(A)
and the control unit
(B)
.
Hence the controller
(A)
becomes
portable.
IP20
DMX CONTROLLER SET
This DMX system includes a controller
(A)
and a control unit
(B)
.
The controller has a wall fixed base
wired to the control unit.
IP20
S.3413
S.3411
S.4701.09
S.4700
S.3493
S.3494